VERSION

OSPF has two versions: Version 1 (RFC 1131) and Version 2. I’m not sure if anyone has ever tried the version 1. It was published in the year 1989 and it was immediately replaced by version 2. I tried to check the RFC to know more about this but this is what I got:

I cannot differentiate the two versions because right now when we say OSPF (for IPv4), that means we are referring to version 2.

TYPE

There are 5 different OSPF packet types: Type 1 – Hello packet, Type 2- Database Descriptor packet, Type 3 – Link State Request packet, Type 4 – Link State Update packet, and Type 5 – Link State Acknowledgement packet. So if the field has a value of 3 that means it is a Link State Request packet type.

PACKET LENGTH

This is total OSPF packet length in bytes which also includes the OSPF packet header

ROUTER ID
This is the router ID of the source of the packet or the advertising router.

AREA ID
It is the area number to which the message belongs to and presented in dotted decimal.

CHECKSUM
This is the 16-bit standard IP checksum which includes calculation of the entire message except the authentication field.

AUTHENTICATION TYPE

There are 3 OSPF authentication type: 0 – no password, 1 – clear text, 3 – MD5 password. So when you use an MD5 password on the interface, this field should have a value of 3.

AUTHENTICATION

This is a 64-bit field used for data integrity.